User's Guide
Table Of Contents
- User Manual rev5
- User Manual rev5
- FCC.IC Statements rev.P1-8
- DRAFT_T100Tablet_UG_Trimble_Geospatial-MCS_DRAFT0_regulatory version.rev2.pdf
- Safety information
- 1 Introduction
- 2 Basic setup and operation
- 3 Using the Windows 10 operating system
- 4 Connecting to and using wireless networks
- 5 Working with GNSS
- 6 Connecting to accessories and other devices
- 7 Using the camera
- 8 Using the pre-installed apps
- 9 Troubleshooting, downloading updates, and repair
Using the Windows 10
operating system
Using accounts
Using the Start menu
Using the Action Center
Using the Windows Mobility Center
Using Task View and virtual desktops
Settings
Display settings:adjusting the backlight
Display settings:rotation lock
This section introduces some basic information on using the Windows 10 Pro operating
system on your T100 tablet. For comprehensive information, go to Get Started with
Windows 10 on http://windows.microsoft.com.
Using accounts
When you set up your T100 tablet, an account is set up for you. You can create additional
accounts later for each user of the device, so that each person using the device can have
their own settings.
To set up additional accounts and to change account settings, tap
, then tap the quick-
access Accounts icon above the icon. Or, go to / Settings / Accounts.
Sign in
1. Press the Power button to turn on or wake the T100 tablet.
2. Swipe up on the screen.
3
Trimble T100 Tablet User Guide | 34