User's Guide

4 Connecting to and using wireless networks
Working with cellular broadband
Before you can connect to a cellular broadband network, you must insert a SIMcard (see
Installing a SIM card, page 26), turn on Cellular data, and configure the connection.
Connecting to cellular broadband
1.
Tap the Wireless network icon
in the bottom-right corner of the screen, tap
Cellular to turn it on, then tap-hold it and tap Go to Settings. (Or, tap / Settings /
Network and Internet / Cellular.)
2. Under Cellular, select the name of your operator—for example, AT&T.
3. If you want to connect to this network every time it's in range, select Connect
automatically.
4. Windows will switch automatically between Wi-Fi and cellular broadband as needed.
You might incur extra charges if you allow roaming.
5. Tap Connect.
For more information, refer to the help topic on Cellular settings in Windows 10 on the
Windows 10 support site www.support.microsoft.com.
Locating the device's IMEI number
The IMEI number is a unique 15-digit number that identifies the cellular module installed
on your device. Your cellular broadband operator may need to know the IMEI number of
your device in order to register the device with the network and activate your cellular
broadband data plan.
If your T100 tablet is cellular broadband enabled, the IMEI number will be printed on the
serial number label under the battery.
Alternatively, to check the IMEI number in the operating system:
1. Tap Settings / Network and Internet / Cellular.
2. Select the Cellular module icon, then select Advanced options.
The cellular module properties (including the IMEI) are displayed in the Properties
section.
3. To copy the IMEI number to the clipboard, select Copy, then paste the text into your
desired application (for example, Notepad, or the Email client) using the Paste
command or the Ctrl+V keypad shortcut.
If you cannot find the IMEInumber for your device, contact your reseller.
Trimble T100 Tablet User Guide | 41