User's Guide
Table Of Contents
- User Manual rev5
- User Manual rev5
- FCC.IC Statements rev.P1-8
- DRAFT_T100Tablet_UG_Trimble_Geospatial-MCS_DRAFT0_regulatory version.rev2.pdf
- Safety information
- 1 Introduction
- 2 Basic setup and operation
- 3 Using the Windows 10 operating system
- 4 Connecting to and using wireless networks
- 5 Working with GNSS
- 6 Connecting to accessories and other devices
- 7 Using the camera
- 8 Using the pre-installed apps
- 9 Troubleshooting, downloading updates, and repair
Connecting to accessories and
other devices
Using the office stand
Mounting the tablet on a pole
Connecting to USB accessories
Connecting to Bluetooth accessories
Using Trimble EMPOWER modules
You can connect monitors, accessories, and other devices directly to your T100 tablet
using USB or Bluetooth. Some custom accessories can connect to the device through the
proprietary docking connector.
Using the office stand
An optional office stand is available for the T100 tablet, for docking, charging, and
connection to a range of USB peripherals, including keyboard and mouse. The office stand
comprises a DC-in port for the AC-DC adapter, an HDMIport, an Ethernet port, and four
USB ports.
When using the office stand:
l Make sure the T100 tablet is securely seated onto the office stand.
l The office stand must be powered by the AC-DC adapter for the Ethernet and USB
ports to function.
To use the office stand with the T100 tablet:
1. Plug the AC end of the office stand power cord into an electrical outlet or power strip,
and plug the other end into the power port on the office stand.
2. If you want to use a wired network connection, connect a network cable to the
Ethernet port on the office stand.
6
Trimble T100 Tablet User Guide | 43