User Manual
9
10
or
Power Output: L/R Ribbon Tweeter: 10W+10W
L/R Mid-Range: 55W + 55W
Signal-Noise Rao dB(A): ≥90dB(A)
Input Interface: AUX, Balance Input, Opcal, Coaxial, Bluetooth
Input Sensivity: Balance Input: 1300±50mV
Aux Input: 550±50mV
Bluetooth Input: 500±50mFFs
Opcal Input: 350±50mFFs
Coaxial Input: 350±50mFFs
Noise Level: ≤25dB(A)
Frequency Response: 46Hz~20KHz
Tweeter: Phase Correcon Horn Loaded Ribbon Tweeter
Mid-Woofer: 5.5" Aluminum Cone Neo Power Mid-Woofer
Cabinet Size (WxHxD): 203 x 355 x 295 (mm)
Net Weight: 19 Kg (42 Pounds ) / Set
Specificaons
/statement
Pairing
Bluetooth Input
1. Turn on speaker and switch to Bluetooth mode by pressing the Bluetooth buon on the
remote control or press the master volume control on back panel of the acve speaker.
2. Go to setup secon on your source devices (mobile phones, tablets, etc.) and search for
nearby Bluetooth devices, you will find “AIRPULSE A200” in the list.
3. Pair your device with “AIRPULSE A200”.
4. Play audio tracks on your device and adjust the volume to a desired level.
Other operaons
5. Aer pairing, using the pair record on your source device to re-connect to the speaker;
6. Bluetooth of the product will be powered off aer switching away from Bluetooth mode,
so in other audio mode Bluetooth connecon can not be made.
7. When switch to Bluetooth mode, the speaker will try to connect the last connected
Bluetooth source device.
8. To disconnect Bluetooth, press and hold the master volume control for about 2 seconds.
Note:
1. Bluetooth connecvity and compability may be different among different source
devices, depending on the soware versions of source devices.
2. To enjoy the full Bluetooth funcons of this product, please ensure your mobile device
supports A2DP and AVRCP profile.
3. PIN code for connecon is “0000” if needed.
AIRPULSE A200
English
English
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other
countries. aptX is a trademark of Qualcomm Technologies Internaonal, Ltd., registered in the
United States and other countries.
NOTICE: For the need of technical improvement and system upgrade, informaon
contained herein may be subject to change from me to me without prior noce.