User Manual

17
18
Specificaons/statement
Tweeter: Horn Loaded Ribbon Tweeter
Mid-Woofer: 4.5 inch Aluminum Cone Mid-Woofer
Amplifier System: Digital Amplifier with Xmos Processor
Power Output: L/R (Treble): 10W+10W,
L/R (Woofer): 40W+40W
Frequency Range: 52Hz-40KHz
Signal-Noise Rao: L/R: ≥90dB(A)
Input Mode: AUX, PC, USB, Opcal, Bluetooth.
The USB, Opcal inputs support up to 192KHz input sample rate
Input Sensivity: AUX: 450±50mV
PC: 550±50mV
USB: 400±50mFFs
Opcal: 400±50mFFs
Bluetooth: 500±50mFFs
Sub Out : 1200mV Max(Changes with the master volume changes)
Mains Voltage: 100-240V AC 50/60Hz
Cabinet Size (WxHxD): 140x250x220mm
Net Weight: 9.3Kg (20.5 Pounds) / Set
NOTICE: For the need of technical improvement and system upgrade, informaon
contained herein may be subject to change from me to me without prior noce.
AIRPULSE A80
Bluetooth
Or
VOLUME / INPUT
VOLU ME / INPUT
1. Press the “ ” buon on the remote control or press the “VOLUME / INPUT” buon
on the rear panel of the acve speaker to select Bluetooth input mode, LED indicator
on the acve speaker will display “ ”.
2. Set your Bluetooth device to search for and connect to “AIRPULSE A80”; pin code for
connecon is “0000” if needed.
Operaons may be different between different devices, please refer to the operaonal
instrucons aached with the devices.
* Effecve Bluetooth connecon distance is within 10 meters.
* The Bluetooth of A80 can only be searched and connected in Bluetooth input.
The exisng Bluetooth connecon will be disconnected once the speaker is switched into
other audio inputs. When switched to Bluetooth input, the speaker will try to connect
to the Bluetooth device connected last me.
* To disconnect Bluetooth, press and hold the “ ” buon on the remote control for above
2 seconds.
* To enjoy all Bluetooth funcons please ensure your audio device has A2DP and AVRCP
profiles.
* When connected to this product, Bluetooth connecvity and funcons may be different
between different Bluetooth devices, depending on soware sengs of Bluetooth devices.
3. Play music on the connected Bluetooth device, press the “+/-” buon on the remote
control or press the “VOLUME / INPUT” buon on the rear panel of the acve speaker
to adjust volume to a desired level.
Or
VOLUME / INPUT
VOLU ME / INPUT
Bluetooth Input Mode
English English