OPT COAX AUX BASS Dongguan Platinum Audio Systems Co., LTD No. 2 East Industry Road, Songshan Lake National High-tech Industrial Development Zone, Dongguan 523808 China www.airpulseaudio.
Important safety instruction Important safety instruction 1. Please read the instructions carefully. Keep it in safe place for future reference 2. Heed all warnings. 3. Follow all instructions. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 5. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
Important safety instruction Important safety instruction Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Catalog Box contents Left speaker English English Box contents ....................................................................................................... 6 Speakers illustration ..............................….…………………………..…….................... 7-8 Remote control illustration ……….........……...……..…………...……..……..................... 9 Installing battery in remote control ……..………..……..……....……..……....……....…… 10 Preparations Connect to playback devices ……………………….....………..…………..……..……....……..
Speakers illustration Speakers illustration 14 -2 10 11 12 +2 -4 +4 -6 +6 -1 15 +1 -2 +2 -3 16 +3 DESIGNED BY PHIL JONES 17 18 1 Right speaker 7 8 9 - + +6 +3 0 -3 -6 10 11 12 -2 +2 -4 +4 -6 +6 -1 +1 -2 +2 -3 +3 +1 0 -1 -3 +3 DESIGNED BY PHIL JONES 17 18 Left speaker 1.LED display window and remote receiving window Displays the current audio source signal.
Remote control illustration The remote control does not function in the balanced and unbalanced inputs, it functions in other inputs (AUX/Coaxial/Optical/USB/Bluetooth). ① ① Standby button ② Mute Mute off speaker output Volume up/down Adjust playing volume Install or replace remote control battery: 1. As the illustration shows, use a slotted screwdriver to remove the cover.
Preparations Preparations Right speaker BALANCED 平衡输入 UNBALANCED 非平衡输入 OTHERS 其它输入 Left speaker - - + + CD player RCA audio cable - +6 +3 0 -3 -6 CD player/audio decoder/ music player, etc.
Unbalanced Input 1. Connect the "BALANCED INPUT" ports on the rear panels of both speakers to audio source devices with balanced output port using XLR cables. 1. Connect the "UNBALANCED INPUT" ports on the rear panels of both speakers to audio source devices with RCA port using RCA audio cables. L R Right speaker Left speaker Left speaker Right speaker CD player CD player CD player/ decoder, etc. CD player/ decoder, etc.
Other inputs - optical/coaxial 1. In the wireless connection mode, insert RCA audio cable into AUX input port on the rear panel of the right speaker (pay attention to L/R connector matching); then connect RCA audio cable to audio source devices with RCA output port. (please ensure the left and right speakers have been paired) 1.
Other inputs - USB Other inputs - USB Connect PC to speakers In the wireless connection mode, connect Windows PC already installed with USB driver or Apple Mac to the USB input port on the right speaker using USB connecting cable.
Other inputs - Bluetooth For Mac users, please open "System Preferences" → "Sound" → "Output" Tab to select "AIRPULSE A300Pro" as the current audio output device. 1. In the wireless connection mode, slide the "INPUT SELECT" switches to the "OTHERS" positions on the rear panels of both speakers, and press the " " button on the remote control or press the "VOLUME" dial on the rear panel of the right speaker to select Bluetooth input, LED display window on the right speaker will display " ".
Troubleshooting Specifications/statement Horn Loaded Ribbon Tweeter 6.
Instructions de sécurité importantes Instructions de sécurité importantes Lisez le contenu suivant avec attention avant d'allumer votre équipement. Respectez les instructions ci-dessous. Conservez ces informations pour référence future. Avertissement: 1. Ne remplacez la pile que par une pile du même type pour remplacer la pile de la télécommande. 2. Ne jamais démonter, frapper, ou écraser la pile dans la télécommande, ni la jeter au feu. 3.
Sommaire Contenu de la boîte Haut-parleur de gauche Haut-parleur de droite Télécommande OPT COAX AUX BASS TREBLE RCA audio cable Câble de connexion USB Câble d’entrée en fibre optque Câble d'alimentaton x 2 Mode d’emploi Remarque: Les images utilisées servent de référence uniquement, et peuvent ne pas correspondre au produit. 25 26 Français Français Contenu de la boîte ……………………………………………………….………………..….……...…. 26 Illustration du haut-parleur ………………………………………………………………….
Illustration du haut-parleur Illustration du haut-parleur 13 7 8 9 14 -2 10 11 12 +2 -4 +4 -6 +6 -1 15 +1 -2 +2 -3 16 +3 DESIGNED BY PHIL JONES 17 18 1 7.Bouton d’association Les haut-parleurs de gauche et de droite ont été associés en usine.
Description de la télécommande ② Installation de la pile dans la télécommande La télécommande ne fonctionne pas avec les entrées Equilibrée et Non équilibrée, mais fonctionne avec les autres entrées (AUX/Coaxial/Optique/USB/Bluetooth). ① ① Bouton veille ② Muet Pour couper le son du haut-parleur Augmentation et réduction du volume Pour régler le volume en lecture Installer/remplacer les piles de la télécommande: 1. Comme illustré, utilisez un tournevis à tête plate pour retirer le cache.
Préparatifs Préparatifs 3. Basculement de sélection d’entrée 1.
Entrée equilibrée Entrée non équilibrée 1. Connectez les ports «BALANCED INPUT» des panneaux arrière de chaque haut-parleur à des appareils audio sources équipés de ports de sortie Équilibrée à l’aide de câbles XLR. 1. Connectez les ports « UNBALANCED INPUT » des panneaux arrière de chaque haut-parleur à des appareils audio sources équipés de ports RCA à l’aide de câbles audio RCA.
Autres entrées - AUX Autres entrées - coaxial/optique 1. En mode de connexion sans fil, Branchez un câble audio RCA au port d'entrée AUX sur le panneau arrière de l'enceinte droite (veillez à faire correspondre les couleurs des fiches avec celles des ports). Branchez ensuite le câble audio RCA à des dispositifs de source audio équipés de ports RCA. (veuillez vérifier que les haut-parleurs de gauche et de droite ont été associés) 1.
Autres entrées - USB Autres entrées - USB La puce d'interface USB utilisée dans le système A300Pro est une puce XMOS communément utilisée par les équipements audio haut de gamme. Après connexion à un PC, l'interface USB extrait et lit directement le signal audio numérique et le lit comme s'il s'agissait d'une « carte son USB externe ».
Autres entrées - USB Autres entrées - Bluetooth Si vous êtes un utilisateur Mac, ouvrez « System Preferences » → « Sound » → onglet « Output » pour sélectionner « AIRPULSE A300Pro » comme périphérique de lecture actuel. 1.
Caractéristiques techniques/Informations supplémentaires Tweeter: Tweeter à ruban pavillonnaire Caisson de moyens: Caisson de moyens actif en cône d'aluminium suspendu de 6,5 pouces en néodime Système d'amplification: Amplificateur numérique avec processeur Xmos Puissance de sortie: G/D (aigus) : 10W+10W, G/D (caisson) : 120W+120W Plage de fréquences: 40Hz-40KHz Rapport signal/bruit: G/D: ≥90 dB(A) Mode d'entrée: Équilibrée/Non équilibrée/AUX/USB/Optique/Coaxial/Bluetooth Dimensions du boîtier (LxHxP): 225 x