Specifications

PRODUCT SPECIFICATIONS Split System Heat Pump: HVH8
428 51 5900 03 43
Specifications subject to change without notice.
DETAILED COOLING CAPACITIES
#
− EFFICIENCY MODE & COMFORT + DEHUMIDIFY MODE CONTINUED
HVH860
COOLING INDOOR MODEL CAPACITY POWER FURNACE MODEL
FCM4X60***L 1.00 1.00
EA*4X60L21A* 0.96 1.07 *9MA*0602120A** EA*4X60L21A* 0.97 1.02 *9MA*0802120A** EA*4X60L21A* 0.97 1.02 *9MA*1002122A** EA*4X60L21A* 0.97 1.02 *8MV*1102120** EA*4X60L24A* 0.96 1.07 *9MA*0602120A** EA*4X60L24A* 0.97 1.02 *9MA*0802120A** EA*4X60L24A* 0.97 1.02 *9MA*1002122A** EA*4X60L24A* 0.97 1.02 *9MA*1202422A** EA*4X60L24A* 0.97 1.02 *8MV*1102120** EA*4X60L24A* 0.97 0.97 *8MV*1352422**
EN(A,D,W)4X60L24** 0.96 1.02 *9MA*0602120A** EN(A,D,W)4X60L24** 0.97 1.02 *9MA*0802120A** EN(A,D,W)4X60L24** 0.97 1.02 *9MA*1002122A** EN(A,D,W)4X60L24** 0.97 1.02 *9MA*1202422A** EN(A,D,W)4X60L24** 0.97 0.97 *8MV*1102120** EN(A,D,W)4X60L24** 0.97 0.97 *8MV*1352422**
EHD4X60AAL 0.96 1.07 *9MA*0602120A** EHD4X60AAL 0.97 1.02 *9MA*0802120A** EHD4X60AAL 0.98 1.03 *9MA*1002122A** EHD4X60AAL 0.97 1.02 *9MA*1202422A** EHD4X60AAL 0.98 1.03 *8MV*1102120** EHD4X60AAL 0.98 1.03 *8MV*1352422**
2−STAGE (Hi−Stage 5, Lo−Stage 2)
COOLING INDOOR
MODEL
HIGH
SPEED
CAP.
POWER
LOW
SPEED
CAP.
POWER FURNACE MODEL
FVM4X60***L 1.00 1.00 1.00 1.00
EN(A,D,W)4X60L24** 1.00 1.11 1.00 1.09 OLV154F20A
NOTES: * Tested combination. { Total and sensible capacities are net capacities. Blower motor heat has been subtracted. } Sensible capacities are shown for both 80_F (27_C) and 75_F (24_C) entering air at the indoor coil. For sensible capacities at other than these, deduct 835 Btuh (245 kW) per 1000 CFM (480 L/S) of indoor coil air for each degree below reference temperature, or add 835 Btuh (245 kW) per 1000 CFM (480 L/S) of indoor coil air for each degree above reference temperature. # Detailed cooling capacities are based on indoor and outdoor unit at the same elevation per AHRI standard 210/240-2008. If additional tubing length and/or indoor unit is located above outdoor unit, a slight variation in capacity may occur. ** System kw is total of indoor and outdoor unit kilowatts. NOTE: When the required data falls between the published data, inter polation may be performed. Extrapolation is not an acceptable practice. EWB — Entering Wet Bulb