Owners Manual

9
Specifications subject to change without notice.
441 02 2401 04
NOTE TO EQUIPMENT OWNER:
For your convenience, please record the model and serial numbers of your new equipment in the spaces
provided. This information, along with the installation data and dealer contact information will be helpful
should your system require maintenance or service.
FURNACE
Model # _____________________________________
Serial # ______________________________________
AIR CONDITIONER OR HEAT PUMP
Model # _____________________________________
Serial # _____________________________________
INDOOR COIL (Furnace Coil or Fan Coil)
Model # _____________________________________
Serial # _____________________________________
INSTALLATION INFORMATION:
Date Installed ________________________________
DEALERSHIP CONTACT INFORMATION:
Company Name_______________________________
Address______________________________________
_____________________________________________
Phone Number _______________________________
Technician Name _____________________________
_____________________________________________
_____________________________________________
NOTE TO INSTALLER:
This manual must be left with the equipment owner.
MAINTENANCE CHECKLIST
In addition to the type of routing maintenance you might be willing to perform; your furnace should be inspected regularly by a
properly trained service technician.
You should work with your dealer or service technician to assure your inspection includes the following at a minimum.
DESCRIPTION
INSPECTION INTERVAL
Monthly Semiannually Annually
Furnace specific, external items:
Clean or replace air filters. X
Inspect cabinet for signs of damage. X
Inspect and clean door louvers if needed. X
Inspect electrical disconnect for proper function. Repair or replace as necessary. X
Inspect external wiring for damage. X
Inspect gas supply line and manual shutoff for leaks. X
Furnace specific, internal items:
Inspect and clean blower assembly (includes blower housing, blower wheel and
motor).
X
Inspect gas valve and check for proper manifold gas pressure Adjust as needed. X
Inspect ignition system and safety controls. Clean and adjust as needed. X
Inspect control box, associated controls, wiring and connections. X
Check combustion blower housing for lint and debris and clean as necessary. X
Inspect burner assembly  clean as needed. X
Inspect RPJ® heat exchanger  clean as needed. X
Inspect flue system—check for proper attachment to the furnace, any dislocated
sections, and for signs of corrosion. Replace if necessary.
X
System:
Inspect airflow system (ductwork)—check for leaks and repair as needed. X
Inspect evaporator coil, drain pan and condensate drain lines as applicable.
Clean as needed.
X
This list may not include all maintenance items, and inspection interval times may vary depending on operational conditions of the
furnace.
Ask your servicing dealer for further details about an economical service contract that covers seasonal inspections.