Specification Guide
Table Of Contents
Slab
Number
Nominal
Tonnage
Pan
Width
Pan
Depth
Coil
Height
Weight Pallet Qty
E22 1.5 - 3 18" 19 1/2" 15" 23 8
E23 1.5 - 3 18" 19 1/2" 17" 26 8
E24 1.5 - 3.5 18" 19 1/2" 19" 27 8
E25 1.5 - 4 18" 19 1/2" 21"
32 4
E30 1.5 - 2 18" 19 1/2" 11" 22 8
E31 1.5 - 2.5 18" 19 1/2" 13" 24 8
E32 1.5 - 3 18" 19 1/2" 15" 28 8
E33 1.5 - 3 18" 19 1/2" 17" 32 8
E34 1.5 - 3.5 18" 19 1/2" 19"
35 8
E35 1.5 - 4 18" 19 1/2" 21" 39 4
E36 3.5 - 5 18" 19 1/2" 23" 41 4
E37 3.5 - 5 18" 19 1/2" 25" 45 4
E48 3.5 - 5 18" 19 1/2" 27" 44 4
E49 3.5 - 5 18" 19 1/2" 25" 46 4
E50 3.5 - 5 18" 19 1/2" 27" 50 4
E51 3.5 - 5 18" 19 1/2" 29" 53 4
E52 4 - 5 18" 19 1/2" 31" 55 4
E54 3.5 - 5 18" 19 1/2" 29" 50 4
E55 3.5 - 5 18" 19 1/2" 31" 50 4
E58 1.5 - 3 18" 19 1/2" 17" 42 8
E59 1.5 - 3.5 18" 19 1/2" 19" 45 8
E66 3 - 4 18" 19 1/2" 21" 48 4
E67 4 - 5 18" 19 1/2" 23" 49 4
SG-MHC-05
June 2018
Specification Guide
M Series
Manufactured Housing Evaporator Coils
2175 West Park Place Blvd., Stone Mountain, GA 30087
www.adpnow.com
Product improvement is a continuous process at Advanced Distributor Products. Therefore, product specifications are subject to
change
without notice and without obligation on our part. Please contact your ADP representative or distributor to verify details.
© by Advanced Distributor Products. All rights reserved.
Features
•
High efficiency lanced fin design.
•
“No-hassle” 5-year warranty.
•
R-22, R-410A, AC & heat pump compatible.
•
All coils have durable packaging with bar coded labels on the box.
•
Threaded expansion valves available factory installed or as a field installed kit.
•
Coils are air pressure tested at 500 psi, leak tested with helium, sealed with
rubber plugs, then charged with dry air.
•
Downflow drip shields are molded into drain pan.
•
Filter-friendly top plate on most models (except 22" & above).
•
Down-turned headers are sized out to easily receive line set.
•
Factory software for TXV failure testing.
•
Includes die
-cut foam sheet for sealing, drain ELL, drain hose & clamp.
•
Dedicated upflow/downflow.
•
Copper refrigerant connections for easy brazing.
•
Rifled copper tubing.
•
Field or factory installed threaded expansion valve.
Available Options