User Manual

11
SELECTION
• If you want to change temperature unit ℉ ↔ ℃,
when the unit is stopped,
push '∨' and '∧' button simultaneously
for 3 seconds.
LOCK or UNLOCK
SPOT or ROOM MODE
℉ or ℃
To change the temperature of the entire room,
select Spot or Room mode. For 'targeted' cooling
of machinery servers or people etc select
'spot mode'. Applicable only when cooling mode.
• If you want to display room temperature,
when unit is operated, push 'mode' and
'∨' button simultaneously for 3 seconds.
• Light be on the 'Room LED' when room mode set.
• If you press '∨' for 5 seconds when the unit is
turned off you can control 'LOCK, UNLOCK' mode.
• When You set 'LOCK' there will be '.'
below the number in the screen.
• You can set 'UNLOCK' or 'LOCK' after pressing
'∧' button.
79
79.
UL
2679