User Manual

7
rev0
CONTROL PANEL FUNCTIONS
① Power : Use to power on / off.
② ∨ ∧ Button : Raises or lowers temperature and/ or sleep (off) time.
③ Mode : Use to select cooling mode or Dehumidifier mode or FAN mode
④ Low Mode : Control fan low speed.
⑤ High Mode : Cantrol fan high speed.
⑥ Off Timer : To set the length of time, once turned on, that you wish the cooler to run for.
You can set 0~24 hours. Time intervals are 30mins.up to 10 hours and then 1 hour between to
10 and 24 hours.
⑦ Room : If the LED is On, the displayed temperature is for Room temp. If the LED
is Off, the displayed temperature is for spot temp.
⑧ Comp. : When the compressor is operating, the LED is On.
⑨ Error : Error signal ( E1 : High Pressure, E2 : Low Pressure, E3 : Sensor, AF: Eva Freezing)
⑩ Water Full: Red light indicates ‘Tank Full’. The compressor will shut off
automatically. Empty tank and replace in position to resume operation.
⑪ Display : Display Room/Spot temperature, the setting temp and sleep time in case of
setting them. When the user set the sleep timer, ‘hr’ will be turned on.
(Display of 'LO' : under the 32℉, Display of 'HI' : over the 99℉)
⑧
⑨
①②
③ ④ ⑤
⑧
⑦
⑥
⑨
⑪
⑩