User Manual

9
rev0
HOW TO SET THE 'OFF' TIMER
This function enables you to set the length of time you want the cooler to operate.
You can set the time period from 30min. to 24 hours in 30min. and 1 hour increments.
1. When cooler is operating, press the 'Off Timer'
button and set the length of time you want by
pressing ▲ or ▼. Each time you press
the button you will increase the 'time to off'
period by 30mins. up to 10 hours, and 1 hour
thereafter up to 24 hours.
The display will show .5 for 30min and 1 for an hour.
e.g. One and a half hours will show 1.5.
2. When you have finished setting the time period,
the 'Off Timer' lamp will be on which indicates
the cooler is in sleep (Off Timer) mode.
3. If you press the 'Off Timer' button during its
operation, the remaining time will be shown.
4. To CANCEL timing, press 'Off Timer' button
for ONE second. It will then switch
the timer off automatically.
OFF TIMER LAMP IS ON
AFTER 1hr
73