User`s guide

Note that this method works only in non-promiscuous mode.

Does your product work on the Toshiba e740 series?

Yes, it works fine on the Toshiba e740 series, including promiscuous mode. As pointed out by

Dataworm of PocketWarrior, you have to select the network adapter named EC2NDS1. Either

select this adapter at program startup, or go to OptionsÆSelect Adapter from the program’s

main screen.

If it works fine with the Toshiba e740 series, why not the e750?

Our sniffer should actually work with any adapter, since ours is just an ethernet sniffer with no

inherent WiFi capability, unlike programs like netstumbler or pocket warrior (to which we have

contributed free source code). We currently have tens of thousands of users of our sniffer, but

only a handful of driver conflicts. However, sometimes your hardware device manufacturer

unintentionally "breaks" the functionality of its WiFi adapter for 3rd party programs. A good

example of this is the IPAQ 5450 series, which is the sister device of the Toshiba. Finally,

someone figured out a special registry hack to fix the functionality that HP "broke" in their

PDA. HP has also started to fix their hardware problem in later ROM updates. The Toshiba

e740 adapter works perfectly, so presumably there is a problem (or limitation) with the newer

driver for e750 that prevents it from working with certain 3rd party programs. We have notified

Toshiba of the issue. Make sure to try a soft reset first, and make sure to disable other WiFi

programs. If it still doesn't work, your best bet is to wait for a working driver or ROM update

from HP or Toshiba.

Does your Airscanner Mobile Sniffer work on older devices running

PocketPC 2000, such as my Jordana or Casio E-125? If not, do you have any

plans to offer a product that will work with PocketPC 2000 in the future?

Our products only support PocketPC 2002/2003 running on devices with ARM-based processors

(including X-scale), which is the most prevalent platform. We unfortunately cannot support

older operating systems or devices.

I don't see any packets? Is it working?

While the mobile sniffer will pick up most packets, if the data is transmitted from a 'hidden'

WLAN, it will not be detected. In addition, you will need to enable the Promiscuous Mode

under the Options menu. Without this enabled, you will only be able to pick up traffic sent to or

from your own Pocket PC.

I get a “Can't Set Mode” error?

This could possibly be resolved by a driver update, if you are using incorrect drivers for

your WNIC.