Manual

MN078-1 Rev F
8/12
29
[Read the Important Safety Rules section before operating this equipment.]
Cleaning the Nebulizer
1. After each treatment, separate the nebulizer and the ³T´ piece or mouthpiece assembly.
2. Remove or unscrew the nebulizer cu p, and rinse each component thoroughly in warm
water.
3. Once a day, clean all nebulizer parts (excluding air supply tubing) with a mild detergent
or soap solution in warm water. Rinse thoroughly, and soak all parts in a solution of
Figure 8
one (1) par t white vinegar and three (3) parts water for 30 minutes to disinfect.
4. Rinse thoroughly in warm water to remove the disinfectant solution.
5. Place all nebulizer parts on a paper towel or soft absorbent material to air dry.
DO NOT
WIPE DRY.
6. When dry, store the nebulizer parts in a clean container or plastic bag.
7. Repeat the above procedure after each treatment/patient use.
Federal (USA) law restricts this device to sale or rental by order of a physician or other licensed health care
provider.
Perfo rm steps 1 and 2 below after each treatment to prevent medication from collecting and hardening
inside the nebulizer parts.