Installation Guide

AirSynergy Equipment Installation Guide
Page 22 Commercial in Confidence SYN-UG-007 Rev A0.41
4 Installing AirSynergy
4.1 Mount the AirSynergy Universal Mounting Plate
The AirSynergy is normally mounted on a pole (in close proximity to its external antenna if not using
the AirSynergy front mounted Antenna. Take care to install the mounting plate the correct way up so
that the AirSynergy unit will fit with the PoE connector pointing downwards. This is with the slot
openings in the bracket at the top edges as shown.
Figure 15 – AirSynergy mounting plate and fixings
Figure 16 – Feed clamp bands through the quick release locking mechanisms
Figure 17 – Press down the locking mechanism with the slack band fed through