Installation Guide

AirSynergy Equipment Installation Guide
Page 31 Commercial in Confidence SYN-UG-007 Rev A0.41
5.2 Connecting RF Jumper cables to External Antenna
Figure 33 – Connecting the antenna RF cables
Caution: Do not over-tighten the RF connector. RF failures can result when the
RF connector is over-tightened.
Weather-proofing of the RF N type connectors with weather-proofing tapes. (self -amalgamating
followed by a layer of black PVC tape.
Figure 34 – AirSynergy Front mount antenna connections – applying self -amalgamating tape
Apply a layer of self-amalgamating tape and a layer of black electrical tape to the weather-exposed
RF connector.