Installation Guide

AirSynergy Equipment Installation Guide
Page 50 Commercial in Confidence SYN-UG-007 Rev A0.41
8 Appendix A
8.1 Review Job Sheet
The Job Sheet should include the following information:
 Pole for installation identified
 Position on pole identified
 Pole access restrictions (highway regulations, other services on pole, power pole)
 Method of reaching pole positions (ladders, Elevated work platform)
 AC main fuseway available for PSU
 Configuration programming details known
 Point of connection for Ethernet (if applicable)
 All equipment items available at the installation site
o Main AirSynergy unit
o Mounting bracket and pole clamps
o PSU
o PoE injector (with fixing kit)
o Ethernet cable assembly
o GPS Antenna
o GPS antenna installation kit
o Front sector Antenna (if applicable)
o Front sector Antenna mounting bracket ad fixing kit (if applicable)
o External panel antenna (if applicable)
o RF feeder cable tails (if applicable)
 Required tools
o Large flat screw driver for pole clamps
o Small flat screwdriver for PoE power terminations
o Small cross-head screwdriver for PoE box lid and fixings for PoE injector and
PSU
o 20mm wrench or small pipe wrench for RF connections
o 10mm wrench for main unit mounting flange nuts
o Side cutters
o Wire strippers
o Krone punch down tool
o Tilt meter to set antenna downtilts
o Ring terminals crimp tool
 Required ancilliary equipment
o Lap top PC for initial configuration
o Ethernet cable for temporary connection of the lap top
 Other install materials
o Self amalgamating
o Black PVC tape
o Cable ties
o Labels