Installation Guide

AirSynergy Equipment Installation Guide
Page 58 Commercial in Confidence SYN-UG-007 Rev A0.41
12 Appendix E – PSU for USA
To comply with US regulations that apply to outdoor deployments of mains power supplies, a special
US version of the AirSynergy power supply has been produced with the PSU module and the mains
connecting blocks enclosed in a small NEMA approved enclosure. The mains cable and 48V power
cables are brought through the weatherproof glands provided. This type of power supply (SYN-PSU-
ODUL-AC-1) must be used for all deployments in the USA.
Figure 69 – AirSynergy Mains PSU and enclosure for USA deployments
Figure 70 – 48V DC cable attached ready for connection to the PoE injector