User Manual

AS8100 Sitespan User Guide Version 3.7
605-0000-426
DLP 056
Draft Issue 6.0 Date 4/4/00
Page 181 of 305 © 2000 Airspan Communications Ltd
SUBSCRIBER TERMINAL VIEWS FIXED ASSIGNMENT
This procedure describes Subscriber Terminal Views.
STEP PROCEDURE
1. Display the Modem Shelf. To display a view see DLP-019 or GSI-017.
2. To display the Subscriber Terminal either double click the mouse while pointing to
the ST icon on the Modem Card, or use the ST View button when in the Modem Card
View.
3. The ST Icon indicates the type of ST connected to the Modem
4. The ST View displays the following information:
• Inventory Information. The inventory shows both the Current and Other
Firmware versions being used. See DLP-019 for other inventory details.
• A Self Test button. For details of use see DLP-016.
• Reset button to reset the card.
• An Apply Loopback button. This is not operational in this version.
• Alarms: Link Unavailable.
Poor BER.
PSU Tamper (CRU using Type 2 PSU only).
Switch to Battery (CRU using Type 2 PSU only).
Low Battery (CRU using Type 2 PSU only).
• CRU Signal Strength. See DLP-069 Measuring Signal Strength.