User Manual

AS8100 Sitespan User Guide Version 3.7

605-0000-426

DLP 057

Draft Issue 6.0 Date 4/4/00

FA ALARMS IN ST VIEW

Use this procedure to look at the alarms in ST view Fixed Assignment only.

STEP PROCEDURE

1. If the alarm is at the ST, the symbols displayed on the Shelf View are coloured red.

2. Clicking on the symbol brings up the Card View ST. Alternatively the ST View can

be displayed by clicking on ST View button when in Modem Card View.

3. The Card View ST in the screenshot shows the status of the ST, i.e., Poor Bit Error

Rate. The alarm icon colour indicates whether they are OK, faulty or receiving

attention. Also shown are details of the Serial Number and Firmware Code of the ST.

Alarm States possible in ST view are:-

• Poor Bit Error Rate (Errors greater than 1 in 10

-3

• Link Unavailable (Complete failure of RF path).

• Ringer Failed

• ST PSU Tampered

• ST Switched to Battery

• ST Battery Low