User Manual

AS8100 Sitespan User Guide Version 3.7
605-0000-426
DLP 123
Draft Issue 6.0 Date 4/4/00
Page 300 of 305
The following Call statistics are displayed:
Statistic
Description
Inc. Attempts Total Number of incoming call attempts. (Collisions are not
included in this figure).
Inc. Fail (N/R) Number of incoming calls that fail to acquire radio (after
retries).
Inc. Fail (R/D) Number of incoming calls that fail due to radio drop.
Inc. Fail (Other)
Number of incoming calls that fail due to other reasons.
Inc. Success Number of incoming calls the reached the “connected state”
and were cleared down normally.
Out. Attempts Total Number of outgoing call attempts. (Collisions are not
included in this figure).
Out. Fail (N/R) Number of outgoing calls that fail to acquire radio (after
retries).
Out. Fail (R/D) Number of outgoing calls that fail due to radio drop.
Out. Fail (Other) Number of outgoing calls that fail due to other reasons.
Out. Success. Number of outgoing calls that reached the “connected state”
and were cleared down normally.
Call Hold (Secs). This represents the call hold duration in seconds.
Bumped This represents the number of calls that were in the
“connected” state and then were cleared by the system (not
the users) because an RW was taken out of service.
Importing Statistics Data into a Database or Spreadsheet
1. To view statistical records in a database or spreadsheet, first locate the statistics file in
C:\Sitespan\Statistics\… or in the location defined when the log was set-up. The file is a
.txt file and the records are Tab delimited. . The import wizard on the spreadsheet or
database sets the records into the appropriate fields.
Printing Statistics
1. Display the Statistics list as described above
2. From the file menu select print. Set parameters in the print window and click OK.