User Manual

AS8100 Sitespan User Guide Version 3.7
605-0000-426
GSI 019
Draft Issue 6.0. Date 4/4/00
Page 65 of 305
Server Components
This section covers all components required on the “server” machine (this is the
computer connected to the equipment).
Installing RAS on the “Server”
1. Select Start, Settings, Control Panel. “Double Click” the Network icon on Control
Panel.
Figure 18: The Network Control Dialogue
2. Select the Services tab.
3. Click Add and select Remote Access Service from the list.
4. You will be prompted for the location of the Windows NT setup files. Enter this
information and the setup routine will load the necessary files.
5. Once the files are loaded the system will take you through the logical steps of RAS
setup. Firstly you will be asked to specify which modem (if you have more than one)
you wish to use for RAS then select Configure and select “Receive calls only”.
6. Select OK
7. Select Network