User Manual

AS8100 Sitespan User Guide Version 3.7

605-0000-426

DLP 005

Draft Issue 6.0 Date 4/4/00

STARTING AS8100 SITESPAN

Use this procedure to log on to the system and to gain user access to the Sitespan system.

This procedure is dependent on the completion of the procedures GSI-009, 010, 011; and

012.

STEP PROCEDURE

1. The Sitespan programs may be accessed from Start, Programs, Sitespan.

2. If the PC is the Sitespan Server, run the server software by selecting the Sitespan Server. A

icon should appear at the system tray in the bottom of the screen. If the server is to be

accessed from dial-up links ensure users have been given accounts and access rights

(procedure DLP-002) before continuing.

3. To run the Equipment View software select the Sitespan Client. The Sitespan Equipment

View startup screen should appear.

4. When running the Equipment View for the first time it is recommended that the file

Template.SSD is used to set the screen. This file is provided by the set-up program and is

placed in the directory where Sitespan is installed. It is selected from the File menu.

5. Note: Only one copy of the Equipment View software may run and any attempt to run

another Equipment View invokes the following message:

STOP. THIS PROCEDURE HAS BEEN COMPLETED.