User Manual

AS4000 Access Concentrator
Installation and Commissioning
DLP 001
605-0000-453
Issue 1.2dr Date 7/02/00
Page 1 of 4 © Copyright Airspan Communications Corporation 2000
PREPARATORY TASKS
1. Installation Tools and Equipment
The following lists of tools and equipment are required to successfully install and test
the AS4000 Access Concentrator Racks.
1.1. Required Tools
• Combination Spanners: 8 mm, 13 mm, 17 mm, & 19 mm.
• Spirit Level: 18 inch.
• Pozidrive: No 1 x 75 mm.
• No 2 x 100 mm
• No 3 x 150 mm.
• Screwdriver, flat blade: 3 mm x 100 mm.
• Screwdriver, flat blade: 5.5 mm x 100 mm.
• Screwdriver, flat blade: 8 mm x 150 mm.
• Hammer, Ball Pein: 1lb.
• Drill Bits, Masonry: 11 mm, 12 mm, 13 mm.
• Ratchet Crimp Tool for red, blue and yellow insulated crimps.
• Crimp Tool type 6A with VQ dies for co-ax connectors.
• Cordless Drill/Driver.