User Manual
AS4000 Access Concentrator
Installation and Commissioning
DLP 007
605-0000-453
Issue 1.2dr Date 7/02/00
Page 1 of 14 © Copyright Airspan Communications Corporation 2000
SETTING UP SYSTEM USING SITESPAN
Within Sitespan, both the racks and the shelves must be ‘built’ before connecting to the Racks
Do not connect Sitespan to the rack at this stage. This should be done prior to the
commissioning of either the AC or CT racks.
The following steps must be followed:
STEP PROCEDURE
1. Setting up Site Configuration on Sitespan
Before the system can be configured, Sitespan Version 3.4 Build 4 or later must be installed
on the dedicated PC. Before installing, ensure that the PC is running Windows NT service
pack 3 or later is set to run RAS and has a spare comms port or Digiport available. Note If the
Sitespan managing an existing network is to be updated from a previous version then the
current database must be updated prior to running the V3.4 version. See Appendix 4 for
details of running the transfer program. For details on installing Sitespan software see the
Sitespan User Guide 605-0000-426
1. Sitespan can then be started as follows:
2. Start the Server by selecting ‘server’ from the ‘start menu’ (In the ‘Sitespan V34’
folder, under programs)
3. Start the Client by selecting ‘client’ from the ‘start menu’ (In the ‘Sitespan V34’ folder,
under programs)
4. From the client view, open ‘template.ssd’ from the file menu
5. Highlight the ‘object list, server’ and ‘create server’ from the ‘edit menu’