User Manual

AS4000 Access Concentrator
Installation and Commissioning
DLP 007
605-0000-453
Issue 1.2dr Date 7/02/00
Page 13 of 14
6.3. DATA
1. With Shelf view displayed. Position mouse over the DATA Card (if DATA card installed)
position to insert card, click right mouse button and select Airspan DATA Properties.
Click left mouse button in the box alongside each E1 link provisioned to the Switch. Set
the impedance of each link. If special signalling features are required, click the Configure
button and enter the parameters. Repeat for other DATA cards.