User Manual

AS4000 Subscriber Terminal
Installation and Commissioning
DLP 009
605-0000-454
Draft Issue 1.3 Date 8/02/00
Page 16 of 18
10. Installation of the Modular Units
1. Fix the Earthing and Securing Bracket to the Modular Unit using the M3 screw
provided with the Bracket.
2. Slide the Modular Unit into the Modular Enclosure using the guides to position
the bottom of the unit. When fully inserted secure unit into the enclosure using
the knurled fixing screw on the fixing bracket.
1
2
3
4
Earthing and Securing
Bracket
Modular Unit
Guides
Fixing Hole
Modular
Enclosure (part)
Modular
Enclosure (part)
11. IF Drop Cable connections to the Modular Units
1. Bring the drop cables through the cable entry glands at the base of the unit. See
Figure 58.
a) Drop cable Termination (Type T6)
1. Strip the Drop Cable using a knife or cable stripping tool to the dimensions
shown in Figure 25.
2. Place the connector over the cable end ensuring that the inner sleeve passes
between the inner core and screen braid