User Manual

AS4000 Subscriber Terminal
Installation and Commissioning
GSI-005
605-0000-454
Draft Issue 1.3 Date 8/02/00
Page 1 of 14
INSTALLATION PROCESS.
1. Delivery Inspection
Upon taking delivery of the equipment consignment, check that the consignment
agrees in all particulars with the consignment delivery documentation (number of
boxes, descriptions, contents of boxes, etc.). Any discrepancy or damage must be
reported immediately to ACC ([phone]) for further instructions. In
case of severe damage, do not accept the consignment from the carrier.
2. Unpacking Inspection
The contents of each box must be checked against the relevant part lists provided
with the box, for the correct part numbers and quantities, and for damage. Any
shortage or damaged items must be reported immediately to ACC for further
instructions at the address given in Material Return and Repair Procedure (605-
0000-435) or:
ACC Help Desk
TELEPHONE: [phone]
FAX: [phone]
E-Mail: [e-mail]
Dispose of all unnecessary packaging in a safe manner according to the
customer’s requirements.
Note: It is recommended that one package carton of each type be retained should
it be required to return any faulty or damaged items for repair.