User Manual

AS4000 Subscriber Terminal
Installation and Commissioning
DLP 007
605-0000-454
Draft Issue 1.3 Date 8/02/00
Page 2 of 4
STEP PROCEDURE
1. Installing The R series Service Interface Unit
1. Install the S series Service Interface Unit within 1 metre of an AC power point
and 50 metres of the Antenna. (100 metres if using 100m drop cabling).
2. Confirm the position of the Service Interface Unit (allow for adequate ventilation
and service access).
3. Offer the Service Interface Unit up into position and mark the four fixing
positions onto the wall.
100mm
167mm
180mm
190mm
Figure 39 Service Interface Unit Positioning