User Manual

AS4000 Subscriber Terminal
Installation and Commissioning
DLP 008
605-0000-454
Draft Issue 1.3 Date 8/02/00
Page 2 of 8
STEP PROCEDURE
2. Installation
1. Install the Service Interface Unit within 1 metre of an AC power point and 50
metres of the Antenna. (100 metres if using 100m drop cabling).
2. Confirm the position of the Service Interface Unit (allow for adequate ventilation
and service access). Ensure that the drop cable can be attached without
compromising the minimum bend radius.
3. Wall Mounting the Service Interface Unit
1. The wall mounted unit fits
Figure 46. Service Interface Unit Wall Mounting Bracket
2. Install the Service Interface Unit within 1 metres of an AC power point and 50
metres of the Antenna. (100 metres if using 100m drop cable).
3. Offer the Wall Mounting Bracket up into position and mark the three fixing
positions onto the wall. The Wall Mounting Bracket should be fitted with the
location lugs pointing upward.