User Manual

AS4000 Subscriber Terminal
Installation and Commissioning
DLP 009
605-0000-454
Draft Issue 1.3 Date 8/02/00
Page 4 of 18
Cabinet
M8 x 90mm Dyna-bolts (x4)
Wall
Figure 51. Enclosure (cut away) Fixed To Wall.
2. Securing the Modular Enclosure to a wooden structure
1. Using the Enclosure as a template, mark the first hole position.
2. Drill a first hole pilot, 5mm diameter to a depth of 40mm (use a drilling depth
gauge),. Screw the M8 Coach Bolt provided through the enclosure into the
hole sufficient to position enclosure on the wall..
3. Using a spirit level, adjust the position of the Modular Enclosure and mark the
remaining 3 holes. Remove the Enclosure.
4. Drill the remaining pilot holes, 5mm diameter to a depth of 40mm, then fit the
Hex Head M8 Coach Bolts and washers provided through the enclosure into
the holes.
5. Tighten all the bolts sufficient to ensure a firm fixing to the wall.