Installation Guide

AirHarmony‐4200DC(InternalFilters)InstallationGuide
UGD‐D01196 AirspanCommercialandInternalUse 22
2.2 AirHarmony-4200 DC Internal Filters Installation
Checklist
PlantheinstallationoftheAirHarmony‐4200DCbyusingtheInstallationChecklist,whichyoucan
findasaremovablejobaidinAppendixAforthisguide.
3 Verifying Prerequisites
PriortoinstallingtheAirHarmony‐4200DCInternalFilterunit,verifytherequiredsafety,power,
tools,partsandcomponents.Thischapterincludesthehardware,software,andclientrequirements 
forinstallation.
Important:SetuprequirementsfortheinstallationisdetailedintheJobSheet,seeAppendix_A.
3.1 Verifying Site Requirements
TosetuptheAirHarmony‐4200DCInternalFilterunit,an
IPconnectiontoaNetspan serverisrequired. 
3.2 Verify Installation Requirements
VerifytheTools

Table7.MinimumHardwareRequirements
Tool Use
#13wrench forsecuringtheM8HexHeadboltsonthe
Pole/wallmount
1/2”SocketWrench For5/16”Hexhead(Lag)boltswhenwallmounting

