Installation Guide

AirHarmony‐4200DC(InternalFilters)InstallationGuide
UGD‐D01196 AirspanCommercialandInternalUse 44

Figure23:Slideoninnerhousing


Note:Checkthattherenospacebetweentheinnerhousingandmountingflange.Checkand
removeanydebristhatmightinterferewiththeconnection.

6. Slidetheoutershellovertheinnerhousingandturntheouterbayonetshell1/4turn
clockwise,untilitclicks intoplace.

Figure24:Slideoverandclick






Note:Theshellshouldbehandtightenedonly.DoNOTusetoolstotightentheshell.

Oncetheconnectorisproperlyinstalled,thecableshouldbepositionedandsecuredtominimize
stressonthecableandconnector.
