User's Manual

AirHarmony-1000 Installation Guide
UGD-D01006 Airspan Commercial and Internal Use 37
Figure 28: Tighten clamp bands
6. Mounting bracket is installed and ready for AC/DC Converter mounting.
7. Align the 4 mounting slots located on the flange of the AC/DC Converter with the 4
threaded holes on the mounting bracket.
8. Insert the 4 pan head screws (supplied) and tighten.
Figure 29: Pole mounting – exploded view
5.7.2 AC/DC Converter Wall Mount Assembly
The following images show the wall mount assembly. The converter can be fastened directly to a wall
utilizing the holes on the unit body (4 places).
Note: For the wall mount assembly the mounting bracket is not required.
Note: The AC/DC converter can be mounted horizontally if required.
1. Position AC/DC Converter against the wall in close proximity to the AirHarmony-1000 so as to
facilitate the proper connection.
2. Mark the wall through the holes on the AC/DC Converter at the required height.
3. Attach the AC/DC Converter to the wall using screws and wall plugs (x4) rated for at least 8-
10 Kg per fastener.