User's Manual

AirHarmony-1000 Installation Guide
UGD-D01006 Airspan Commercial and Internal Use 43
Figure 44: Assemble and tighten
6.3 Wiring AC Power Input Cable
1. Cut the AC power cable to the required length.
2. Prepare the ends of the AC/DC converter cable and thread the connector parts over the
cable.
3. Secure the prepared ends of the drop cable into the head part of the connector (female part).
Figure 45: AC/DC converter cable connector assembly
4. Insert and secure the white wire into position 1 and the black wire into position 2 and green
wire into position (earth ground).
Figure 46: AC/DC converter wires assembled
5. Assemble the parts of the connector and tighten the gland to provide a waterproof seal.
Figure 47: Assemble and tighten
6. Fasten the 2 parts of the connector together and tighten to make a waterproof seal.
7. Position the pins correctly; the connector is secured to the unit with a locking ring that is
screwed into place. Use firm hand pressure only, the connector has a built in sealing ring.