User's Manual

AirHarmony-1000 Installation Guide
UGD-D01006 Airspan Commercial and Internal Use 52
A Job Sheet
This job sheet enables the users to keep track of their installation. It covers all the prerequisites
required for accomplishing the AirHarmony-1000 installation.
Site Requirements
o Pole or wall for installation identified
o Position on pole or wall identified
o Pole access restrictions (highway regulations, other services on pole,
power pole)
o Method of reaching pole positions (ladders, Elevated work platform)
o AC main fuse block available for AC/DC converter (where needed)
o Configuration programming details known
o Point of connection for Ethernet (if applicable)
o All equipment items available at the installation site
o Main AirHarmony-1000 unit
o Mounting bracket and pole clamps
o AC/DC converter
o GPS Antenna
o Self-amalgamating tape
o Black PVC tape
o Weather-proofing of the connections with a layer of self-
amalgamating tape followed by an over layer of PVC tape.
o SFP cable assembly
Tool Requirements
(For further information, see Verify the Tools.)
o Large flat screw driver for pole clamps
o Small flat blade screw driver (insulated shaft recommended)
o Medium Philips head screw driver
o 13mm wrench or small pipe wrench
o 10mm wrench for unit mounting flange nuts
o Knife
o pliers
o Small side cutters
o Tweezers (or fine blade long nose pliers)
o Wire strippers
o Tilt-meter
Required Ancillary Equipment
o Laptop PC for initial configuration
o cable for temporary connection of the lap top