Installation Manual

Hardware Installation Guide Installing the BSR
WipLL uses the following wire color-coding standard for CAT 5 cables (8 wires
used) connecting outdoor radio units to indoor Ethernet hubs or switches:
Figure 6-12: WipLL wire color-coding for 15-pin D-type connectors
Note: The wires are twisted together in pairs, for example, blue/white with
blue, and orange/white with orange. This prevents electrical interference
between the transmitter pins. For example, pin 3 (Tx+; orange / white) is paired
and twisted with pin 4 (Tx-; orange).
02030311-07 Airspan Networks Inc. 6-19