Installation Manual

Hardware Installation Guide Installing the BSR
6.2.2. Wall Mounting
BSR wall mounting is performed in two stages:


1.
Attaching the mounting bracket to the BSR’s mounting holes
Attaching the mounting bracket (attached to the BSR) to the wall
To mount the BSR on a wall:
Attach the mounting bracket to the BSR using two stainless steel bolts, as shown
in Figure 6-4.
Jubilee clip slots
BSR
BSR Fixing Bolts
BSR Mounting
Bracket
15-pin D-type
connector
Figure 6-4: Attaching the mounting bracket to the BSR
2. Attach the mounting bracket to the wall using four screws. The fixing
dimensions for the mounting bracket are illustrated in Figure 6-5
02030311-07 Airspan Networks Inc. 6-5