Installation Manual

Installing the SPR Hardware Installation Guide
Note: Airspan does not provide screws for attaching the mounting bracket to
the wall. The screw size depends on the structure of the building to which the
bracket is to be attached. When selecting screw sizes, consideration must be
given to the weight of the SPR and load that may be induced in windy
conditions.
6. Adjust the horizontal positioning of the SPR, and then tighten the two stainless-
steel bolts.
Rotation is restricted to the horizontal plane only. The permissible rotation is
shown in Figure 10-8.
Figure 10-8: Horizontal rotation of the SPR
Note: A thread-locking compound is to be used to prevent the bolts working
loose.
10-10 Airspan Networks Inc. 02030311-07