Installation Manual

Installing the SPR Hardware Installation Guide
To mount the SPR on a pole:
1. Attach the mounting bracket to the SPR using two stainless steel bolts.
Pivot Hole
‘U’ Bolt
Locking Holes
BSR mounting
Bracket
Clamping Bracket
Figure 10-10: SPR mounting bracket assembly
2.
3.
Attach the clamping bracket to the mounting bracket using two M8 stainless
bolts.
Attach the Clamping bracket to the pole by placing the U-bolt around the pole,
and then inserting the U-bolt through the Clamping bracket and securing it by
screwing the two bolts on the U-bolt.
10-12 Airspan Networks Inc. 02030311-07