Manualshelf

Installation Manual

ManualsBrandsAirspan Networks ManualsElectronicsHybrid System Tranceiver
11121314151617181920
Table Of Contents
Installing the SPR Hardware Installation Guide
To connect the RSSI LED adapter (see Figure 10-13):
1.
2.
3.
4.
Connect the 15-pin D-type male connector, at one end of the straight-through
cable, to the SPR.
Connect the 15-pin D-type female connector, at the other end of the straight-
through cable from the SPR, to the RSS LED adapter.
Connect the 15-pin D-type male connector, at one end of the straight-through
cable, to the SDA.
Connect the 15-pin D-type male connector, at the other end of the straight-
through cable from the SDA, to the RSS LED adapter.
10-16 Airspan Networks Inc. 02030311-07