Installation Manual

Hardware Installation Guide Installing the SPR
10.1. Physical Dimensions and Basic Design
The SPR is encased in a chassis and provides access to the SPR’s communication
port (15-pin D-type) at the front panel (see figure below). The SPR’s bottom panel
provides holes for mounting the SPR to, for example, a pole or wall.
15-pin D-type port
Figure 10-1: SPR (with built-in antennal)
The SPR’s physical dimensions are described in the following table.
Table 10-1: SPR physical dimensions
SPR model
Parameter
Standard Gain
Antenna
High Gain Antenna
Comment
Height 311 mm (12.24 inches) 400 mm (15.74 inches)
Width 224 mm (8.82 inches) 317 mm (12.48 inches)
Depth 65.5 mm (2.58 inches) 65.5 mm (2.58 inches)
Weight 2.5 kg 4.7 kg
The SPR’s physical
dimensions exclude the
mounting kit.
SPR models with an N-type
receptacle for attaching a
third-party external antenna
are also available.
02030311-07 Airspan Networks Inc. 10-3