Installation Manual

Installing the SPR Hardware Installation Guide
Note: For performing SPR initial configuration using WipLL’s management
applications, refer to Airspan’s WipConfig User’s Guide or WipConfig PDA
User’s Guide.
10.6. Connecting Power
The SPR receives power through its 15-pin D-type port from the SDA. In turn, the
SDA connects to an external AC-DC power adapter from where it receives power.
The SDA provides 48 VDC nominal power to the SPR (minimum of 30 VDC:
maximum of 55 VDC).
Warning: If you are using an external antenna, ensure that you connect the
antenna before connecting the SPR to the power source.
Note: For a description on connecting power to the SPR and SDA, see
Chapter 9, “Installing the SDA”.
10-30 Airspan Networks Inc. 02030311-07