User's Manual

Error! Style not defined. Hardware Installation Guide
xvi Airspan Networks Inc. 02030311-10
 Appendix D, "RSS Led Plug Cabling for SPR with DB9 Port": describes
connector pinouts for SPR-to-RSS LED Adapter cabling when the old SPR
model that provides a 9-pin D-type port is used.
 Appendix E, "RJ-45 to DB15 Adapter for IDU/ODU Connectivity": describes
the use of an optional RJ-45 to DB15 adapter for connecting the outdoor radio to
the indoor hub/switch.
 Appendix F, "Extending IDU/ODU Cable Length": provides step-by-step
procedure for extending the length of the CAT cable connecting the indoor unit
to the outdoor radio.
 Appendix G, "Evaluating Link Quality": describes the procedures for
evaluating quality of the BSR-SPR link.
 Appendix H, "Installing SDA-E1 for TDMoP": provides step-by-step
instructions on installing ASWipLL SDA-E1 for TDM over packet applications.
 Appendix I, "Installing Lightning Protector": provides step-by-step
instructions on installing third-party lightning protector.
 Appendix J, "FCC Declaration of Conformity ": provides a declaration of FCC
conformity for the ASWipLL radios.
Conventions
This guide uses the following bulletin conventions:
Warning: Provides information that can prevent and avoid bodily o
r
mechanical harm.
Note: Provides useful information.