User's Manual

Mounting the Devices Hardware Installation Guide

7-4 Airspan Networks Inc. 02030311-10

b. Slide an M10-flat washer and M10-spring lock washer onto an M10-hex

head screw (ensure spring lock washer is closest to the bolt's head). From

the external side, insert the M10-hex head screw through the mounting

bracket and BSR's mounting holes. Fasten the M10-hex head screw (one

is provided with a built-in nut while the other requires you to insert an

M10-hex nut into the BSR's mounting hole).

Figure 7-4: Mounting bracket connected to BSR

2. Attach the clamping bracket to the mounting bracket:

a. Slide an M6-spring lock washer onto an M6-hex head screw. Align the

mounting bracket's and clamping bracket's pivot holes, such that the

clamping bracket is aligned to the inside of the mounting bracket. From

the external side of the mounting bracket, insert the M6-hex head screw

into the pivot holes and then fasten, but not tightly. (The clamping

bracket provides a built-in nut.)

BSR's mounting

hole with built-in

nut holder

Mounting bracket

with built-in nut

Mounting

racket