User's Manual

Mounting the Devices Hardware Installation Guide

7-6 Airspan Networks Inc. 02030311-10

Figure 7-6: Attaching BSR to pole using U-bolts

4. Perform final BSR orientation:

a. Adjust the vertical position of the BSR by choosing a final elevation

hole as described in Step 2. Lock the BSR at the desired position by

inserting the locking bolt in the desired position and fastening it tightly.

Fasten tightly the bolt in the pivot hole. See Figure 7-8 for a description

of the angles (in degrees) of each elevation hole.

b. Adjust the horizontal position of the BSR by rotating the BSR about the

pole, and then tightening the nuts of the U-bolts.

BSR positioning is obtained in two planes by adjustment of the mounting

bracket assembly a shown in Figure 7-7.

U-

olt

U-

olt

Fastened by

screws and

washers

Pole