User's Manual

Hardware Installation Guide Connecting Third-Party External Antennas
02030311-10 Airspan Networks Inc. 10-5
10.2.2. Connecting the GPS
The GPS antenna connects to the BSDU's 15-pin D-type port, labeled GPS, located
on the BSDU's rear panel, as shown below.
Figure 10-2: BSDU rear panel showing GPS port
Warning: To avoid electrical or fire hazard, ensure that the connection to the
GPS is made prior to connecting the BSDU to the power supply.
Note: Airspan supplies unterminated cables for connecting the GPS to the
BSDU. For an explanation on cable crimping, see Appendix C, "Cable
Crimping".
The GPS-to-BSDU cable setup is as follows:
 Cable: multipair overall shielded (22 AWG)
 Connectors:
 GPS side: 12-pin female (Deutsch MMP26C-2212S1)
 BSDU side: 15-pin D-type male
15-pin D-type port for GPS