User's Manual Part 1

Table Of Contents

About this Guide Hardware Installation Guide

xiv Airspan Networks Ltd. 02030311-05

Organization of this Guide

This guide is organized into the following chapters and parts:

! Chapter 1, “Introduction”: provides a brief overview of the WipLL hardware

devices.

! Chapter 2, “Safety Guidelines”: lists the safety guidelines for handling cables

and electricity during the installation.

! Chapter 3, “Part List and Required Tools”: lists the equipment provided by

Airspan, as well as the tools needed for installation.

! Part 1, “Installing WipLL Base Station Equipment”: includes the following

chapters concerned with installing WipLL equipment at the base station:

! Chapter 4, “Installing the BSR”

! Chapter 5, “Installing the BSDU”

! Chapter 6, “Installing the GPS”

! Chapter 7, “Installing the BSPS”

! Part 2, “Installing WipLL Customer Premises Equipment”: includes the

following chapters concerned with installing WipLL equipment at the

subscriber’s premises:

! Chapter 8, “Installing the SPR”

! Chapter 8, “Installing the SDA”

! Chapter 9, “Installing the IDR”

! Appendix A, “Glossary”: glossary of terms used in this guide

! Appendix B, “Cable Crimping”: describes the crimping procedure for 15-Pin

D-type, N-type, and GPS connectors.