User's Manual Part 1

Hardware Installation Guide Safety Guidelines
02030311-05 Airspan Networks Ltd. 2-9
2.6.2.3. Signal Cable Designation
A wrap around identification label, similar to that shown in Figure 2-2, is to be fitted
to both ends of WipLL data cables. Care should be taken to ensure that the cable
identification information is clearly visible. The labels are to be supplied with the
installer’s folder. Identify the cable as detailed in the CROL supplied by Contract
Engineering. Fit the label 100 mm from the cable end. Wrap the label ensuring good
adhesion to cable and itself.
From
BDSU 1/1
To
SPR 1
To
SPR 1
From
BDSU 1/1
BSDU End
SPR End
Figure 2-2: Typical signal cable identification label