Manualshelf

Install Guide Part 3

ManualsBrandsAirspan Networks ManualsElectronicsIndoor Data Radio (IDR)
21222324252627282930
Hardware Installation Guide Installing the SPR
02030311-05 Airspan Networks Ltd. 8-23
The Y-cable connector pin assignments are displayed shematically in Figure 8-17.
Figure 8-17: Y-cable connector pin assignment
To connect the SPR to a PC for serial configuration:
1. Connect the 15-pin D-type male connector (P1), at the one end of the Y-cable,
to the SPR, as displayed in Figure 8-18.
2. Connect the 15-pin D-type male connector (J1), at the other end of the Y-cable,
to the SDA, as displayed in Figure 8-18.
3. Connect the 9-pin D-type (RS232) connector (J2), at the other end of the Y-
cable, to the PC, as displayed in Figure 8-18.